R1700 Dry Air Series Compressor - C-Aire Compressors

Regenerative Drying Towers - C-Aire Compressors

Programmable Logic Controller - C-Aire Compressors

Moisture Minder Zero Loss Drains - C-Aire Compressors

Water and Coalescing Filters - C-Aire Compressors

10 HP R1700 Dry Air Fire Protection Compressor

Product Number
R1700H-HD

Product Specs

10 Horsepower
22.07 CFM @ 10 PSI
Three
Phase
208/230 or 460
Volts
Horizontal Tank
Standard pressure (40 psi): Fills a 1,820-gallon dry pipe system in 30 minutes
Low pressure (18 psi): Fills a 4,045-gallon dry pipe system in 30 minutes
Pre-action (10 psi): Fills a 7,280-gallon dry pipe system in 30 minutes
Cold storage below 5°F (40 psi): Fills a 3,640-gallon dry pipe system in 60 minutes
Cold storage below 5°F (18 psi): Fills a 8,089-gallon dry pipe system in 60 minutes
Cold storage below 5°F (10 psi): Fills a 14,560-gallon dry pipe system in 60 minutes
Schneider Electric PLC: Model SR2 B121JD
1/2" NPT Outlet
60" x 32" x 64" (L x D x H)
850 lb Unit Weight
1000 lb Shipping Weight

Standard Features

FM Approved for use in dry pipe and refrigerated area sprinkler systems – NFPA compliant
Molecular sieve regenerative drying system – easy, low-cost maintenance (under $100/year average)
System air dryer than -40°F dewpoint (as low as -80°F)
PLC and zero loss drain minimize runtime and energy waste
Prevents the formation of ice plugs in cold storage fire sprinkler systems and stops the corrosion process
Appropriate for single or multiple-valve systems
Add a new Automatic Air Maintenance Device from C-Aire!
Tank drain and full synthetic oil included
1-year unit warranty & 3-year pump warranty
The regenerative drying system is covered by a 3-year warranty

Calculate Capacity

The C-Aire R1700 10 HP Dry Air Fire Protection Compressor is an FM Approved solution specifically designed for dry fire sprinkler systems in freezer rooms and other cold storage areas, delivering superior performance and protection.

Key Features

Advanced Drying Technology: The regenerative drying system reduces air dew point to less than -40°F, even in extreme conditions of 100°F ambient temperature and 90% relative humidity.
Ice Plug Prevention: Effectively stops the formation of dangerous ice plugs in cold storage systems, ensuring reliable operation when it matters most.
Corrosion Protection: By providing ultra-dry air, the R1700 halts the corrosion process, extending the life of your fire protection system.
Easy Installation and Maintenance: Significantly simpler to install and maintain compared to other dry air systems, saving time and reducing long-term costs.
Nitrogen Alternative: Regenerative drying systems are recommended over nitrogen generators for freezer room and cold storage sprinkler systems due to their better ability to handle air leaks, lower cost for larger systems, and easier maintenance in freezing environments.
Powerful Performance: Delivers 22.07 CFM @ 10 PSI, filling a 1,820-gallon dry pipe system to 40 PSI in 30 minutes, making it perfect for larger fire protection systems.
Freezer Spaces: In cold storage systems maintained below 5°F, NFPA 13 allows for a 60-minute fill time, where the R1700 will fill a 3,640-gallon system to 40 PSI.

Compliance and Certification

FM Approved for use in dry pipe and refrigerated area sprinkler systems – NFPA 13 compliant
NFPA 13 2025 Compliant: Certified for use in fire sprinkler system applications in the US and Canada.

Ideal Applications

Freezer rooms and cold storage facilities
Any environment where preventing ice formation and corrosion in sprinkler systems is critical
Large or leaky sprinkler systems where a nitrogen generator would lack capacity and be cost prohibitive

The C-Aire R1700 represents our commitment to enhancing the fire protection industry through customer feedback, new technology, and industry trends. Experience the next generation of fire protection compressors with improved performance, easier installation, and superior protection against ice plugs and corrosion. Learn more about our Dry Air Series here. According to NFPA 13, air compressors with a flow greater than 5.5 CFM at 10 psi require a tank and regulator-style air maintenance device with a bypass and restrictor (NFPA 13 8.2.6.6). Learn how to configure your dry pipe & pre-action system with C-Aire’s best practices guide here.